-
home > Products > Spinning > Comber > JWF1386(1385)
Product Introduction
JWF1385 Lap Former is the preparation process of Combing machine. it can draft, doubleand wind the slivers into lap to improve fiber straightness, parallelism to be ready forComber. This model is totally Servo controlled and has good cost performance.
JWF1386 is the latestLap Former. It adopts advanced beltwinding technology andcan run with highspeed, high productionand high intelligence.
Technical highlights
-
Introduction
The maximum production speed is 180 m/min and the output can reach over 500 kg/h or more.
Cotton Net tension can be set by touch screen, and transmission mechanisem is cancelled.
The machine adopts three servo motor digital drive, cancels the clutch.
The more precise and perfect automatic control of production process.
-
Introduction
The running speed is up to 230 m/min, and production can reach up over 600 kg/hour.
It adopts new winding technology and insures that lap quality at high speed of winding can meet the requirements of high speed combing of comber.
The drafting system is 3-over-3 rollers drafting, it makes lap inner quality higher and operation more convenient.
It is intelligent design and automatically running.
It can realize the unmanned production of combing process by Jingwei full-automatic combing production system.
Main Specifications
-
JWF 1385
-
JWF 1386
| No. of Feeding head | 2 |
| Sliver doubling No. (picks) | 24~28 |
| Suitable fber length (mm) | below 60 |
| Feeding sliver weight (g/m) | 3.5~6 |
| Batt weight (g/m) | up to 80 |
| Drafting | 2-over-3 roller drafting, pneumatic pressure |
| Lap width (mm) | 300 |
| Lap speed (m/min) | up to 180 |
| Theoretical output (kg/h) | 500 |
| Motor power (kW) | 3 x 7.5 |
|
Air consumption (m3/h) |
2.5~3.5 |
|
Dust suction air volume (m3/h) |
about 3000 |
| Dust suction pressure (Pa) | 1000 |
| Central suction interface pipe dia. (mm) | Φ300 |
| Can size (mm) | Φ600 x 1200, Φ1000 x 1200(Optional) |
| Tube size (mm) | Φ200 x300 |
| Machine weight (kg) | About 4500 |
| No. of Feeding head | 2 |
| Sliver doubling No. (picks) | 24~28 |
| Suitable fber length (mm) | below 60 |
| Feeding sliver weight (g/m) | 3.5~6 |
| Batt weight (g/m) | up to 80 |
| Drafting | 3-over-3 roller drafting, pneumatic pressure |
| Lap width (mm) | 300 |
| Lap speed (m/min) | up to 1230 |
| Theoretical output (kg/h) | 500 |
| Motor power (kW) | 8.5 |
|
Air consumption (m3/h) |
2.5~3.5 |
|
Dust suction air volume (m3/h) |
about 3000 |
| Dust suction pressure (Pa) | 1000 |
| Central suction interface pipe dia. (mm) | Φ300 |
| Can size (mm) | Φ600 x 1200, Φ1000 x 1200(Optional) |
| Tube size (mm) | Φ200 x300 |
| Machine weight (kg) | About 4500 |
Expand
