Product Introduction
Suitable for combing process to produce combed slivers with straight, parallel andevenness fibers. The laps from the lap former will be combed by the machine to remove short ffbers ,neps and impuritiesThe combed slivers can be used for spinning high quality medium and fine varn. This machine is advanced and reliablewith improved performance indexes, a better nep removing performance, automatic unwinding, lap changing ancpiecing-up functions, can run up to an maximum speed of 500 nips/min.
Technical highlights
-
High-speed and efficiency
High speed and efffciency: Max speed can reach 500 nips/min and production up to 80kg/h.
More suitable for high-speed operation.
Use computer for dynamic analysis. optimize detaching rollers and cvlinder transmission design.
Ensure the web combing and piecing-up quality at high speed.
Optimize movementcoordination of nipper, detaching roller and cylinder, adopt timing and positioning design.
Improve the quality of combed silver and yarn evenness.
Optimize the drafting system, using 3-over-3 pressure bar curve drafting device with adjustable main draft and pre draft spacing.
-
High-speed and efficiency
Use the integrated air duct design. Address the impact of airffow on combing quality at high speeds.
Flexible and convenient operating system, high automaticity.
Set the process parameters on the touch screen digitally; provide touch screen trouble shooting feature and failure remote diagnostic capability.
Adopt 130o cylinder variable speed combing technology.
Modular design, ffexible conffguration of coiling type.
Φ 600 mm or Φ1000 mm sliver cans are optional according to customer requirement.
Automatic unwinding,lap changing and piecing-up functions are optional.
Main Specifications
-
JWF1288(1286)
-
JWF1286-01
-
JWF1286-02
-
JWF1286-03
| No.offeeding head | 2 |
| Silver doubling No. (picks) | 24~28 |
| Suitable fber length (mm) | below 60 |
| Feeding silver weight (g/m) | 3.5~6 |
| Batt weight (4/m) | up to 80 |
| Drafting | 2-over-3 roller drafting, pneumatic pressure |
| Lap width (mm) | 300 |
| Lap speed (m/min) | up to 180 |
| Theoretical output (kg/h) | 500 |
| Motor power (kW) | 3 x 7.5 |
| Air consumption (m3/h) | 2.5~3.5 |
| Dust suction air volume (m3/h) | about 3000 |
| Dust suction pressure (Pa) | 1000 |
| Central suction interface pipe dia. (mm) | Φ300 |
| Can size (mm) | Φ600 x 1200, Φ1000 x 1200 (Optional) |
| Tube size (mm) | Φ200 x 300 |
| Machine weight (kg) | About 4500 |
| Speed (nips/min) | 500 |
| Production (kg/h) | 80 |
| Installed Power (kW) | 7.25 |
| Combing Surface Angle | 130o |
| Auto-unwinding, lap changing and piecing-up | Yes |
| Lap weight (g/m) | 60~80 |
Max. Dia. (mm) | 550 |
| Width (mm) | 550 |
| Sliver Counts (ktex) | 3~6 |
| Pressure (Pa) | 0.6 x 106~0.8 x 106 |
Compressed air demanded (Nm3/h) | 2.8 |
| Can Dia. (mm) | 600/1000 (Optional) |
| Can Height (mm) | 1200 |
| Lap Transport | Lap Trolley |
| Noil Extraction | Central Suction + Lap unwinding Integral Suction |
| Speed (nips/min) | 500 |
| Production (kg/h) | 80 |
| Installed Power (kW) | 7.25 |
| Combing Surface Angle | 130o |
| Auto-unwinding, lap changing and piecing-up | Yes |
| Lap weight (g/m) | 60~80 |
Max. Dia. (mm) | 550 |
| Width (mm) | 550 |
| Sliver Counts (ktex) | 3~6 |
| Pressure (Pa) | 0.6 x 106~0.8 x 106 |
Compressed air demanded (Nm3/h) | 2.8 |
| Can Dia. (mm) | 600/1000 (Optional) |
| Can Height (mm) | 1200 |
| Lap Transport | Lap Transport System |
| Noil Extraction | Central Suction + Lap unwinding Integral Suction |
| Speed (nips/min) | 500 |
| Production (kg/h) | 80 |
| Installed Power (kW) | 6.85 |
| Combing Surface Angle | 130o |
| Auto-unwinding, lap changing and piecing-up | No |
| Lap weight (g/m) | 60~80 |
Max. Dia. (mm) | 550 |
| Width (mm) | 550 |
| Sliver Counts (ktex) | 3~6 |
| Pressure (Pa) | 0.6 x 106~0.8 x 106 |
Compressed air demanded (Nm3/h) | 2.8 |
| Can Dia. (mm) | 600/1000 (Optional) |
| Can Height (mm) | 1200 |
| Lap Transport | Lap Trolley |
| Noil Extraction | Central Suction |
Expand
